24" Wide All-Refrigerator

SKU: FF7LWGPCADALHD

Counter height all-refrigerator for general purpose storage applications in labs, healthcare facilities, and other institutions

Estimated Time to Ship:

3 to 5 days

How to Buy

32.25" H x 23.63" W x 23.5" D
(82cm H x 60cm W x 60cm D)

Overview
Height of Cabinet	32.0" (81 cm)
Height to Hinge Cap	32.25" (82 cm)
Width	23.63" (60 cm)
Depth	23.5" (60 cm)
Depth with Handle	25.13" (64 cm)
Depth with door at 90°	46.13" (117 cm)
Capacity	5.5 cu.ft. (156 L)
Defrost Type	Automatic
Door	White
Cabinet	White
US Electrical Safety	ETL
Canadian Electrical Safety	ETL-C
Sanitation	ETL-S
Amps	0.8
Voltage/Frequency	115 V AC/60 Hz
Weight	100.0 lbs. (45 kg)
Parts & Labor Warranty	1 Year
Compressor Warranty	5 Years
UPC	761101161594
Refrigerator Features
Door Swing	LHD
Shelf Type	Wire
Shelf Qty	3
Adjustable Shelves	Yes
Thermostat Type	Dial
Fan Type	Interior
Refrigerant Type	R600a
Refrigerant Amount	0.64oz.
Level Legs Qty	2
Interior Light	Yes
Temperature Range	1 to 10°C
Dimensions
Interior Height	27.75" (70 cm)
Interior Width	20.0" (51 cm)
Interior Depth	17.5" (44 cm)
Compressor Step Height	7.0" (18 cm)
Compressor Step Width	20.0" (51 cm)
Compressor Step Depth	6.0" (15 cm)

Exterior

DTFAR-Temperature display converted to Fahrenheit Factory conversion of temperature readout to display in Fahrenheit	DT - Digital thermostat Install a digital thermostat with external readout for precise temperature management
DLPWR - Factory installed NIST calibrated wireless environmental temperature monitoring device NIST calibrated wireless environmental temperature monitoring device for cloud-based data management	CAS3 3" casters 3" high NSF listed casters designed for institutional use, made from non-marring hard rubber in gray finish
PH - Probe Hole Factory installed probe hole for customer supplied monitoring devices	TM1A - Factory-installed remote contacts with remote alarm Remote alarm contacts with continuous temperature display

Handle

AMHandle - Antimicrobial handle Antimicrobial coated stainless steel handle to reduce germ spread	TBC Copper Towel Bar Handle Factory-installed handle made from pure copper for antimicrobial protection

Door

STO-Step-To-Open Door Pedal Step-to-open door pedal allows hands-free access to open the door 90 degrees

24" Wide Healthcare Refrigerator

Designed for general purpose storage in institutional facilities

ADA compliant

Sized at 32" high for use in settings complying with ADA guidelines for lower counter height

Commercially approved

ETL-S listed to NSF-7 commercial standards

Fully finished white cabinet

Allows the refrigerator to be used freestanding

Front-mounted lock

Keyed lock for a secure interior

Automatic defrost operation

Reduced user maintenance with automatic defrost

Internal fan

Internal fan ensures the interior is evenly cooled from top to bottom

Mechanical thermostat

Dial thermostat located inside for easy temperature management

One piece seamless interior liner

Enjoy easy clean-up with a one piece liner that won't hold a mess in hidden crevices

Hidden evaporator

Cold wall design with hidden evaporator and seamless interior

Deep shelf space

Interior accommodates large trays up to 19 1/2" x 15 1/2"

Adjustable shelves

Rearrange your refrigerator space to accommodate all shapes and sizes or remove shelves for a simple clean-up

Interior light on rocker switch

Turn the light on when you need it and off when you're done with a convenient rocker switch located just behind the thermostat

CARB Compliant

Eco-friendly hydrocarbon-based refrigerant for a greener footprint that meets current CARB regulations

100% CFC free

Environmentally friendly design without ozone-damaging chemicals

Accucold's series of general purpose refrigeration includes a variety of choices ideal for use in healthcare applications.

The FF7LWGPCADALHD is a 32" high all-refrigerator designed to offer an improved performance over similarly sized dorm fridges and residential units. It comes in a slim 24 inch footprint with a large 5.5 cu.ft. interior. This model has a white exterior and left hand door swing. A factory installed front lock is located towards the top of the door to offer convenient security.

Inside, the FF7LWPGCADALHD utilizes low maintenance automatic defrost operation. Our unique "hidden" evaporator is set behind the rear wall to create a seamless, easy-to-clean interior that also maximizes shelf space. This unit has a flat door liner that allows it to accept larger trays (up to 19 1/2" x 16"). Adjustable wire shelves allow users to reconfigure the interior to accommodate a variety of sizes. The interior light is controlled by an on/off rocker switch. An internal fan ensures proper cold air circulation throughout the unit.

The FF7LWGPCADALHD is ETL-S listed to NSF-7 standards for use in commercial establishments. It is a convenient solution to general purpose cold storage applications. Additional general purpose choices are available as freezers and in undercounter, ADA compliant, and large capacity sizes. This unit is designed for general purpose or commercial applications and does not meet DOE energy standards for residential use.

Note: Accucold's general purpose series refrigerators are intended for a wide variety of basic storage of non-critical products. For storage of high-value vaccines, life science materials, and medical or clinical biologicals, browse Accucold's Medical & Laboratory or Pharmacy & Vaccine Storage categories, or contact our product specialists to discuss your options at 1-888-4-MED-LAB.

BROCHURE w/ DRAWINGS
FF7LWGPCADALHD.pdf

TECHNICAL DRAWING (.dwg)
FF7LREFRIGERATORA-C2000.dwg

USE & CARE
GP-PLUS2-PRO-MED_Use___Care_01.2022.pdf

ACCUCOLD CATALOG
Accucold_Cold_Storage_Solutions_Catalog.pdf

Due to our commitment to continuous product improvement, all specifications are subject to change without notice.

California residents:

Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.